Technical data deep hole drilling machines – ST series
| Machine type | ST-500 CNC | ST-1000 CNC | ST-1200 CNC | |
| 1. Capacity | ||||
| Spindle nose | pc. | 1 Stück | 1 Stück | 1 Stück |
| Drilling range | mm | 3 - 25 | 3 - 25 | 3 - 25 |
| Max. drilling depth | mm | 500 | 1.000 | 1.200 |
| 2. Table | ||||
| Table dimension | mm | 600 x 1.000 | 600 x 1.000 | 1.000 x 1.200 |
| Travel X-Axis | mm | 500 | 500 | 1.000 |
| Travel Y-Axis | mm | 350 | 350 | 800 |
| Travel Z-Axis | mm | 500 | 1.000 | 1.200 |
| Travel A-Axis | 400 | |||
| 3. Motors | ||||
| Spindle motor | KW | 11,0 | 11,0 | 11,0 |
| Z-Axis | KW | 1,6 | 1,6 | 1,6 |
| Y-Axis | KW | 3,0 | 3,0 | 3,0 |
| X-Axis | KW | 3,0 | 3,0 | 3,0 |
| A-Axis | KW | -- | -- | 7,0 |
| Chip conveyor | KW | 0,1 | 0,1 | 0,1 |
| Coolant pump motor | KW | 3,5 | 3,5 | 3,5 |
| Automatic lubrication | KW | 0,1 | 0,1 | 0,1 |
| Connecting power | KW | 22,5 | 22,5 | 30,0 |
| 4. Speed | ||||
| Feedrate speed | mm/min | 10 - 150 | 10 - 150 | 10 - 150 |
| Spindle speed | min-1 | 0 - 6.000 (4.000) | 0 - 6.000 (4.000) | 0 - 6.000 (4.000) |
| 5. Coolant filtration unit | ||||
| Coolant pump pressure | kg/cm2 | 0 - 120 | 0 - 120 | 0 - 120 |
| Coolant pump flow | l/min | 30 - 60 | 30 - 60 | 30 - 60 |
| Tank capacity | l | 800 | 1.000 | 1.000 |
| 6. max. weight worlpiece | kg | 1.000 | 1.000 | 5.000 |
| 7. Net weight | kg | 3.500 | 4.000 | 10-000 |
| 8. Space requirements (approx.) | mm | 3.000 x 3.500 | 3.500 x 4.000 | 4.000 x 7.500 |